Expert Answers about Camper Jacks
- Recommended A-Frame Trailer Jack with Foot Plate for 5000-lb Camper Trailer
- A great cost-effective a-frame tongue jack for your 5000-lb camper is the Pro Series # PSEA2000-14007. This top-wind jack features a 3-hole triangular mount, removable foot plate and 2000-lb lifting capacity. This will be plenty for the tongue weight (TW) of your 5K camper trailer. The linked page will let you see all a-frame jacks with a foot plate.
view full answer... - Truck Camper Jack Availability
- For truck bed campers we have jacks like the Brophy Camper Jack part # CJ74 which can do up to 67 inches of lift and 3,000 lbs but we do not have any powered option.
view full answer... - Need Taller Brophy Heavy Duty Cable Camper Jacks
- There is not an extension to the 57" Max Lift Height, Brophy Cable Camper Jacks # CJ31 but there is a taller option. I recommend the 67" version of the Brophy Heavy Duty Cable Camper Jacks, # CX74.
view full answer... - Half Kit of CJ31 1,000 lb 57" Lift Brophy Cable Camper Jacks
- We do have a half kit (or single jack) of the Brophy Cable Camper Jacks - 57" Max Lift Height - 1,000 lbs # CJ31 you referenced. This is found as part # BR29ZR on our site.
view full answer... - Is the Replacement Motor for HappiJac 4820 Camper Jacks Available in Black
- Unfortunately, we do not have the Replacement Clutchless Motor Head for HappiJac Truck Camper Jacks # LC759927 for your 4820 jacks available in black. We only have the white version # LC759927.
view full answer... - Replacement Control Board for HappiJac Jack System with Corded Controller
- I was able to confirm with my contact at Lippert that you can use the Replacement Circuit Board w/ Wireless Remote for HappiJac Electric Truck Camper Jack Systems # LC733540 to replace the circuit/control board on your corded HappiJac system. You can also use the Replacement Circuit Board for HappiJac Electric Truck Camper Jack Systems # LC733513 if you just want the circuit board and don't need the remote replaced.
view full answer... - Is There a Manual to Electric Conversion Kit for HappiJac Model 4160
- There is another solution, but unfortunately there is not a manual to electric conversion kit for the HappiJac 4160. You would need to upgrade your jacks to the HappiJac Electric Truck Camper Jack System # LC736514-ELKIT. The Manual-to-Electric Conversion Kit for HappiJac Truck Camper Jack Systems # LC733960-182524 is only available for the 4220 and 4820 jacks. There is a strong likelihood the jack would fail if used on a different jack/model.
The reason it will not work for your 4160...
view full answer... - Snap Pad Jack Pad for Camper Jacks in 7" and 5.5"
- For you 5-1/2" Husky Lift, we have the Snap Pad Jack Pad for Camper Jacks w/ 5-1/2" Round Feet, # SN97FR. Or, a four pack in the # SN27FR. We do not currently have an option available in 7" round.
view full answer... - Extender Bracket for HappiJac Camper Jacks
- The only extender bracket that we have for the Happijac is the HappiJac Extender Bracket for Dual Wheel Chassis Truck Camper Jacks # HJ54FR that you mentioned.
view full answer... - Camper Jack Extensions For Clearing Dually Rear Wheels
- We have a Swing Out Extension # LC182496 as well as an Extender # HJ54FR to help your camper pass the sides of your truck with the dual wheels. The swing out extensions add 3-1/2" to 4-1/2" of length depending on your mounting brackets and the extender will add 5" of additional clearance.
view full answer... - Trailer Tongue Jack with Pneumatic Tires for Easier Operation
- Most A-frame campers like your 2019 Aliner Classic off-road model will have a caster wheel tongue jack that uses a hard plastic wheel. There are no replacement pneumatic tires that will fit in place of that wheel but there is a specialty jack product that does have dual pneumatic tires, the Trailer Valet 5X Swivel Jack and Trailer Mover # STC-V211.
This unique bolt-on jack allows you to easily move and steer your camper thanks to its 2-speed hand crank operation. It even has an automatic...
view full answer... - 8 Foot Truck Camper in 2005 Dodge Ram Pickup
- Yes we have a wide selection of mounting options for your truck camper on your 2005 Dodge Ram Pickup. The Brophy brand has a series of clamps in powder coating, zinc plated and chrome. Such as the Brophy Clamp On Camper Tie-Downs, # HSAB. Or the Brophy Clamp On Camper Tie-Downs - Bed Mount - Zinc Plated Steel, # HSBP.
You may also want to look at the HappiJac Truck-Mounted Camper Tie-Downs, # LC182908-182928.
view full answer... - Lippert Components Camper Jack Questions
- The Lippert Ground Control # LC358590, includes all of the hardware and install instructions. The price of the Lippert Components Camper Jack # LC358590 can be seen by clicking on the link to this answer page.
I have the product video and the installation instructions attached to this answer page.
view full answer... - Replacement Thrust Bearing Options for an Unknown Square Side Crank Camper Jack
- I see that you got the Replacement Cap for etrailer and Ram Square, Sidewind Jacks # TJD-7000S-CP, which indicates that you have a square side crank jack. I have listed the square jack thrust bearings that we have below, along with their OD/ID, we do not have anything that matches perfectly.
- Replacement Thrust Bearing Kit for Bulldog Trailer Jacks # BD500224 (ID 0.63" & OD 1.42")
- Replacement Bearing for etrailer and Ram Square Jacks # TJD-7000-BR (ID 0.756" & OD 1.519")
- Replacement...
view full answer... - Jack to Replace Manual Jack of Jayco Camper
- Since your Jayco has the standard 3 bolt mounting flange for a trailer jack you can use a powered jack like the Electric Jack w/ Footplate # EJ-3520-WBX easily. This will bolt right up in place of what you have and will save you from having to crank the jack manually.
view full answer... - Availability of Andersen Rapid Jack AM3620 & Wheel Chock and Leveler System AM3604
- We do offer both the Andersen Rapid Jack # AM3620 and the Andersen Camper Wheel Chock and Leveler system # AM3604. The leveler includes both the Rapid Jack and the Tuff Chock # 3605 in one kit.
view full answer... - Available 12V Jacks for Use with Bunk Lights on Rockwood Pop-Up Camper Trailer
- Rockwood does not provide specs for the bunk light adapters installed on your new replacement top but we do offer several items that might do the trick for you. Part # RVC100 is both screw-mount 12V jacks for use with lights that have a 1/4-inch phone plug. This is the same type of plug used on electric musical instruments like guitars.
Each of these jacks features a plastic domed base and a 2-wire hookup for ground (white wire) and 12V positive power (black wire). I am not familiar with...
view full answer... - Need Manual Crank Handle For The Bulldog Trailer Jack # BD500185
- You will need the Bulldog Replacement Manual Override Crank Bolt Kit for Bulldog Powered-Drive Camper Jack, part # BD500191. This is a manual override crank bolt that is designed for the Bulldog Jack # BD500185. It does not include a crank handle. The bolt is designed to be used with a ratchet with an extension.
view full answer... - Lippert Hydraulic Level Up Generation II Jacks For Towable RV Campers
- With your jacks having the holes on top of the jack going vertically into the jack those are the Generation II jacks from Lippert. Here is a list of all the different Generation II Level Up Jacks available.
Black 8K 18-1/2" Replacement Hydraulic Jack Assembly # LC73ED
Black 8K 21-1/16" Replacement Hydraulic Jack Assembly # LC43ED
Silver 8K 21-1/16" Replacement Hydraulic Jack Assembly # LC63ED
14K Lead Leg Hydraulic Jack Assembly # LC83ED
14K Follow Leg Hydraulic Jack Assembly # LC23ED
view full answer... - Looking For Scissor Jack with Mounting Holes in Feet
- The Ultra-Fab # UF48-979006 scissor jack only has holes in the top mounting surface, as it's intended to be mounted to the underside of a camper or trailer.
Stromberg Carlson has similar jacks, part # JSC-24 that has mounting holes on the foot of the jack as well as on the top.
If you look at the photo I provided, you can see a detail of the mounting holes on both jacks.
view full answer...
Go To Results